Guide · Roofing in Texas

Marketing Class 4 impact-resistant roofs in Texas: what the rating means, what TDI says about discounts, and what your ads may promise

A Class 4 roof is a real upgrade you can sell on its own. But most pages about it promise Texas homeowners more than the state does. Here is what the rating means, what the Texas Department of Insurance (TDI) says about discounts today, the words your ads may use, the paperwork that proves the rating, and how to run and measure Class 4 as its own offer.

  • By Kausar Ahmed, Founder, Digital Hark
  • Updated
  • 13 min read
Roofer checking the label on a bundle of impact-resistant shingles on a Texas home

The short answer

A Class 4 roof passed the top level of the UL 2218 impact test. In Texas, TDI says such roofs may earn an insurance discount, but each insurer sets the amount, and no Texas statute we read requires one. Market the roof's rating and paperwork, say "may qualify, ask your insurer", and judge it by signed jobs.

Key takeaways

  • Class 4 is the highest of four classes in the UL 2218 impact test. It is a lab rating with a steel ball, not a promise about hail.
  • TDI says impact-resistant roofs "may be eligible" for a discount and that each insurance company sets the amount. Don't write that Texas law requires one.
  • In September 2026, TDI encouraged insurers to offer meaningful discounts for impact-resistant roofs. It did not require one or set an amount.
  • In ads, say "may qualify for an insurance discount, ask your insurer". Never a percentage, never "insurance will pay", never "hail-proof".
  • After every install, the contractor fills in TDI form PC068. Hand it over with the invoice and the product's rating label or listing.

For hail season timing and Texas storm rules, see our Texas hail season guide. This page covers the Class 4 roof itself: the rating, the insurance wording and the offer.

What does "Class 4" mean on a roof?

TDI puts it plainly: "Roofing products are tested for impact resistance using the UL 2218 impact resistance test. Approved products are classified 1 through 4, Class 4 being the most resistant."

UL 2218 is the standard "Impact Resistance of Prepared Roof Covering Materials", last revised May 28, 2024. Its scope says: "This test method provides impact resistance data for the evaluation of prepared steep slope roof covering materials." Low-slope roof coverings have a separate test, UL 2218A. The test hits the product "from the steel ball at locations … most vulnerable, such as … edges, corners, unsupported sections and joints."

Makers describe the Class 4 test as a 2-inch steel ball dropped twice on the same spot, from 20 feet, without cracking the product. DECRA, a metal-roof maker, lists 1.25, 1.50, 1.75 and 2.00 inch balls for Classes 1 to 4, with the pass line "Sample did not crack when hit twice in the same spot." These are the makers' words, not UL's; check the exact test on the product's own listing.

Three things follow for your marketing:

  • Class 4 is not "hail-proof". UL itself says "there is no currently established direct correlation between the performance of prepared roof covering materials when impacted by hailstones versus steel balls." A Class 4 roof did better in a lab test. That is the honest claim.
  • There is no Class 5. TAMKO, a shingle maker, says on its own product page: "'Beyond Class 4' is a marketing term and does not refer to any official UL impact rating," and "UL testing currently caps at Class 4." Never call a product Class 5 or rated above Class 4.
  • The rating belongs to the product, not to your crew. Check that the exact product you install shows UL 2218 Class 4 on its label or listing. TDI lists the roof coverings that can be tested as "shingles, tiles, shakes, formed metal panels, or sheets, or other types of roof coverings." So metal panels can carry the rating too.

Class 4, FM 4473 and the IBHS shingle ratings: what is the difference?

Homeowners now see more than one hail label. In plain words:

  • UL 2218 Class 4 is the steel-ball lab rating above.
  • FM 4473 is a second test, with ice balls, for rigid roofing such as tile. FORTIFIED asks for FM 4473 Class 4 on tile. For ads and pages for tile work, see our guide to tile roof marketing.
  • The IBHS shingle ratings come from the Insurance Institute for Business & Home Safety (IBHS). It says: "IBHS provides independent, science-based performance ratings that show which impact-resistant asphalt shingles truly stand up to hailstorms," and "We buy shingles from retail stores available to consumers." In its Hail Lab, IBHS makes hailstones to match the size and density of real ones, and "the lab team fires them at roofing materials with a pressurized cannon."
  • FORTIFIED Roof is an IBHS program for the whole roof, not a product label. For hail, its page says asphalt shingles "must also be rated Good or Excellent on the IBHS Hail Impact-Resistant Shingle Ratings," metal panels "must also meet UL 2218 Class 4 impact rating," and tiles "must also meet FM 4473 Class 4 impact rating." IBHS also claims the shingles it rates Good or Excellent "outperform typical Class 4 shingles when tested against realistic hailstones." That is IBHS's own claim.

What this means for your ads: say "Class 4" only for a product that carries the UL 2218 Class 4 rating. Say "FORTIFIED" only for a home that really gets the FORTIFIED designation through the IBHS program, not for a product or a roof you call "built to FORTIFIED". Don't rank products by name in your ads.

Do Texas insurers have to give a discount for a Class 4 roof?

Not by any Texas statute we read. Here is what TDI says today:

  • "Roofing materials installed on structures may be eligible for discounts on your insurance."
  • "Roofing materials that have passed the test criteria are classified as either Class 1, 2, 3 or 4. A Class 4 roof covering would receive the highest premium credit."
  • "The amount of discount for each class of roofing material is established by the insurance company on a company-by-company basis."
  • "The Texas Department of Insurance does not endorse or recommend any roofing material."

The 1998 rule is history. Texas first set impact-resistant roof credits by commissioner's order in 1998 (Commissioner's Order 98-0069, with metal roofs added by Order 98-0390). Many roofing pages still say Texas has required discounts since 1998. TDI's current page does not say that; it says "may be eligible" and leaves the amount to each insurer. We found no Texas statute that sets an impact-resistant roof discount.

The September 2026 bulletin encourages; it does not require. On September 16, 2026, TDI's Commissioner's Bulletin B-0008-26 told residential property insurers: "TDI encourages all property and casualty insurance companies operating in Texas to develop meaningful, actuarially supported premium discounts…" It names "using impact-resistant roofing materials" and "resilient construction standards like IBHS FORTIFIED Home™". In plain words: TDI asked insurers to build such discounts into their rates. It did not set an amount or require one. Fox 4 News reported (September 18, 2026) that TDI also recommended changes to state law for the next legislative session, which starts in January 2027. So check TDI again before you change your wording.

TWIA. TDI says: "TWIA offers policyholders credits on their policy for installing impact resistant roofing materials." For TWIA, the material "must have passed UL Standard 2218", and the PC068 form below "is required by TWIA to be eligible for a credit from TWIA."

One more question for the homeowner's insurer. In 1998, TDI also approved optional endorsements titled "Exclusion of Cosmetic Damage to Roof Coverings Caused by Hail", and said then: "An insurer must inform a consumer of the possibility that cosmetic loss or damage may be excluded…" Tell homeowners: "Ask your insurer how a roof discount fits your policy, including any cosmetic-damage exclusion for hail."

Roof age matters to insurers too. In Florida, insurers look at wind mitigation and roof age.

This is general information, not legal or insurance advice. The homeowner's insurer decides the discount.

What may your ads and landing page say about insurance?

Sell the roof and the paperwork. Leave the discount to the insurer. Every insurance line in your ads should be one you can back with TDI's own words.

SayDon't say
"Class 4 impact-resistant roofs may qualify for an insurance discount. Ask your insurer.""Texas law requires your insurer to give you a discount."
"Each insurance company sets its own discount. Ask yours before you choose a roof.""Save X% on your premium", or any percentage or dollar saving.
"We give you the TDI installation form (PC068) after we install your roof, for your insurer.""Insurance will pay for your new roof." / "Your premium will drop."
"Class 4 is the highest rating in the UL 2218 impact test.""Hail-proof roof." / "Class 5 shingles." / "Rated beyond Class 4."
"In September 2026, TDI encouraged insurers to offer discounts for impact-resistant roofs." (dated, linked to the bulletin)"TDI-approved roof." / "TDI-certified shingles." (TDI "does not endorse or recommend any roofing material.")
"Built with UL 2218 Class 4 shingles.""FORTIFIED roof" (unless the home gets the FORTIFIED designation through IBHS).

TAMKO's own page also warns that an insurance discount is not certain.

Before any claim goes live, check that you can show the proof for it: the product listing for the rating, the TDI page for the discount line. Storm ads in Texas have their own limits on deductibles and adjusting; see what Texas law allows roofers to say after a storm. This is general information, not legal advice; check your ads with a Texas lawyer.

How do you prove the rating to the homeowner and the insurer?

The proof is part of the sale. A homeowner who asks their insurer about a discount needs papers, not a promise.

  • TDI form PC068. TDI says: "Once the roofing material has been installed, the contractor must fill out TDI form PC068 - Impact-Resistant Roofing Installation Form." It adds: "Insurance companies may elect to use this form, or they may require the use of their own form," and the form "is required by TWIA to be eligible for a credit from TWIA." Get the current form from TDI's site, and have your team fill it in after each Class 4 install. If the homeowner's insurer uses its own form, ask the homeowner for it.
  • The rating on the product. Keep the label or product listing that shows the UL 2218 Class 4 rating for the exact product you installed. (In 1998, Texas required products to "bear the Underwriters' Laboratories label" for the credit; that is history, but the label is still the plainest proof.)
  • The invoice, naming the product, so the insurer can match it to the listing.
  • Photos of the installed product on the job, with the homeowner's permission.
  • The maker's warranty papers, handed over as they are.

Put the proof in your sales story: "After we install, you get the TDI form, the product's Class 4 listing, the invoice and photos, ready for your insurer." That line promises papers you control, not a discount you don't.

How do you market Class 4 as its own offer?

Give Class 4 its own place, so it does not get lost in your general re-roof ads, and so you can measure it. This is the same format we use for metal roofing as its own offer.

  • Its own landing page. What Class 4 means (in the words above), the products you install, the proof pack, the Say-column insurance line, photos of your own Class 4 jobs, and a short form.
  • Its own ad group, with ad text that matches the page.
  • The right homeowners: owners planning a re-roof in areas where hail is common (our Texas page and the Texas hail guide show where), owners who just had a roof claim and are choosing what goes back on, and your past customers with older roofs (email your past customers; texts only with consent).
  • Claim re-roofs: if the homeowner chooses a Class 4 roof on a claim job, the upgrade is their choice and their cost difference to discuss with their insurer. Keep inside Texas rules on deductibles and adjusting.
  • Real photos: the product on your jobs, close-ups of the label on the bundle, your crew at work, with the homeowner's permission.
  • No price lines. Quote each job in writing.

When should Class 4 ads run in Texas?

Run Class 4 in two modes.

  • Before the season: education. The Class 4 page, a short video or post that explains the rating, and search ads for homeowners already looking up Class 4 or impact-resistant roofs.
  • After a storm: only where hail really hit. Our guide on how roofers use storm data explains how to find those areas. Lead with repair and inspection by your team, and offer Class 4 as the choice for the new roof.

For the ad set-up itself, see Google Ads for roofers and Facebook ads for roofers.

How do you know Class 4 marketing pays?

Count signed Class 4 jobs, not clicks.

  • Track Class 4 as its own source in your CRM or job list: Class 4 leads, Class 4 estimates, signed Class 4 jobs.
  • Also track upgrades: standard re-roof leads where the homeowner chose Class 4.
  • Work out cost per signed Class 4 job for each season: what you spent on Class 4 ads divided by the Class 4 jobs they signed. See cost per signed job for the method.
  • Check every 60 to 90 days in the season, and compare with the same months for standard re-roofs.

Worked numbers in this guide show the method; they are not real client results. Say a roofer runs a Class 4 ad group for one season and counts:

By the end ofClass 4 leadsClass 4 estimatesSigned Class 4 jobsStandard re-roof leads that chose Class 4
Month 114611
Month 2291332
Month 3411964

By month 3 the Class 4 ad group has signed 6 jobs: divide what you spent on it by 6, and compare that with the cost per signed job of your standard re-roof ads. The 4 upgrades came from your standard ads, so count them there, as a sign that homeowners want the option. If the Class 4 ad group costs more per signed job, check the page and the wording before you cut it, and give open estimates time to decide.

Where Digital Hark fits

Digital Hark builds the marketing side: the Class 4 landing page, the ads in your own accounts, call and form tracking, fast replies (texts only with consent) and a follow-up plan in your CRM. Your team inspects the roof, installs it, fills in the TDI form and sells the job. We never call your leads or sell jobs for you, and we don't give insurance advice. What is included is confirmed in writing in the proposal. See how we work with roofing companies.

Class 4 marketing checklist

  • ☐ Class 4 rating checked on the label or listing of each product you advertise
  • ☐ Insurance wording: "may qualify, ask your insurer" only
  • ☐ No percentage, dollar saving or "insurance will pay" anywhere
  • ☐ No "hail-proof", "Class 5", "beyond Class 4" or "TDI-approved"
  • ☐ "FORTIFIED" only for homes that get the IBHS designation
  • ☐ PC068 filled in by your team after every Class 4 install, plus the insurer's own form if it asks
  • ☐ Proof pack ready: form, product listing, invoice, photos
  • ☐ Its own Class 4 landing page and ad group
  • ☐ Ads by season, and after storms only where hail hit
  • ☐ Class 4 leads and signed jobs tracked on their own, and Texas storm rules checked

Common questions

What is a Class 4 roof?

A roof covering that passed the top level of the UL 2218 impact test. TDI says products are "classified 1 through 4, Class 4 being the most resistant." The test uses steel balls in a lab. The rating belongs to the product, so check its label or listing.

Is a Class 4 roof hail-proof?

No. UL says there is "no currently established direct correlation" between how roof coverings do against steel balls and against hailstones. A Class 4 roof did better in the lab test. Don't call any roof hail-proof in your ads.

Do Texas insurers have to give a discount for a Class 4 roof?

Not by any Texas statute we read. TDI says impact-resistant roofs "may be eligible" for a discount and that each insurance company sets the amount. Texas set credits by commissioner's order in 1998; TDI's current page does not call them required. General information, not legal or insurance advice.

How much is the insurance discount for a Class 4 roof in Texas?

TDI says "the amount of discount for each class of roofing material is established by the insurance company on a company-by-company basis." So the honest answer is: ask your insurer. Ignore any fixed percentage you see online. General information, not insurance advice.

What is TDI form PC068, and who fills it in?

It is TDI's "Impact-Resistant Roofing Installation Form". TDI says the contractor must fill it in once the roof is installed. Insurers may use it or their own form, and TWIA requires it for its credit.

Can a roofer advertise an insurance discount for a Class 4 roof?

Say that Class 4 roofs "may qualify for an insurance discount" and tell homeowners to ask their insurer. Don't name a percentage, promise lower premiums, say insurance will pay, or call a roof TDI-approved: TDI "does not endorse or recommend any roofing material." General information, not legal advice.

Kausar Ahmed, Founder, Digital Hark. Digital Hark runs ads, landing pages, tracking and follow-up systems for home-service contractors. We are not affiliated with TDI, UL, IBHS, TWIA or any roofing maker. This guide is general information, not legal or insurance advice. About Digital Hark

Find out where your leads are being lost

Book a free Growth Diagnosis. We review your ads, website and follow-up, and send you a short written summary of the top leaks and what to fix first.

Check my Class 4 ads and wording

We reply within 24 hours

Free Growth Diagnosis