Guide · Roofing

Hail maps and storm alerts for roofers: what the data tells you, and how to test a tool

Where hail data comes from, what the free weather service sources give you, what paid hail tools say they add, how to use storm data without treating it as proof, and a 30-day test judged by signed jobs.

  • By Kausar Ahmed, Founder, Digital Hark
  • Updated
  • 15 min read
Roofing contractor checking storm reports on a tablet on a suburban street after a storm

The short answer

A hail map shows where hail probably fell, not which roofs are damaged. Start with the free weather service storm reports. A paid tool adds radar swaths, address lists and alerts; it can help only if your team inspects fast and follows up. Test one for 30 days and count signed jobs, not map views.

Key takeaways

  • The Storm Prediction Center posts hail reports for each day, free, as a spreadsheet or a Google Earth file. Its own page says: "All Reports Are Considered Preliminary".
  • A report is one point where someone saw hail. A radar hail size is an estimate. Neither one tells you which roofs are damaged; only an inspection does.
  • Paid tools say they add radar swath maps, alerts, storm history by address and address lists. None of the pages we read shows independent signed-job data.
  • Use storm data to choose where to advertise, where to send crews first and which past customers to contact. Never use it as proof in an ad or with a homeowner.
  • Test a paid tool for 30 days, or until the first storm if none hits, and keep it only if signed jobs pay for the tool and the extra hours.

What is a hail map, and what is a storm alert?

Three different things get called a "hail map":

  • Point reports. A list of places where someone reported hail, with a time and a size. The Storm Prediction Center's daily storm reports are this kind.
  • Radar swaths. A shaded area where radar data suggests hail fell, with an estimated size. The weather service's radar system calls its hail size product "Maximum Estimated Hail Size", or MESH.
  • Storm alerts. A message that a warning is out, or that a new hail map is ready, for the area you chose. The weather service's alerts service "provides NWS watches, warnings, advisories".

The four paid tools we read mix all three, then add their own work on top (see "What do paid hail tools add?" below).

A hail map is storm data, not a lead. Nobody on it asked you for anything. If you are weighing bought or shared storm leads, that is a different question, covered in our guide to where roofing leads come from.

Pages change, so check each source before you rely on it.

What free storm data can a roofer use?

All of these come from the weather service or its research labs. Here is what each one is.

SourceWhat it showsWhen it's readyGood for
SPC daily storm reportsHail, wind and tornado reports as points: place, time, size. Hail sizes are listed "in 1/100 of an Inch (175 = 1.75")". Download as CSV (spreadsheet) or KML (Google Earth).Day by day. A report day runs "from 1200 UTC to 1159 UTC the next day". "Data available back to 6/1/99".A first look at where hail was reported this week
SPC yearly hail filesHail events from 1955 on, "as compiled from NWS Storm Data", in CSV. "All hail in one 8.0 mb zip file".Yearly. The files ran 1950–2025.Storm history for your service area
Storm Data / NCEI Storm Events DatabaseThe official record of storms, checked by the weather service.The SPC says the official database "takes a few months to compile".The checked record, months later
NWS warnings and alerts serviceWatches, warnings and advisories. A severe thunderstorm warning means a storm "producing hail one inch or larger in diameter and/or winds equal or exceed 58 miles an hour".Live. Warnings "are usually issued for a duration of one hour."An alert to your phone or your software
NSSL MRMS radar products, including MESHRadar-based products that "offer assistance for hail, wind, tornado", including the Maximum Estimated Hail Size.Real time. The public site shows "a rolling archive of real-time operational MRMS products dating back to October 2020".Estimated hail areas, not just points
mPING appWeather reports from the public, sent from a phone.Not stated.Your crews can report hail they see

A few plain notes on these:

  • The SPC daily list is the quickest free source. The Storm Prediction Center posts every hail, wind and tornado report it gets, for each day. Each report is a point: a place, a time and a hail size someone reported. You can download the day as a spreadsheet or open it in Google Earth.
  • The yearly files are for history. For storm history in your area, SPC's free yearly hail files go back to 1955 and come from the weather service's checked Storm Data.
  • Radar data is public. The MRMS team says "the MRMS product suite is publicly available to any other entity who wishes to access and use the data". Many paid hail maps start from radar data like this and add their own work.
  • Anyone can report hail. mPING is "a project to collect weather information from the public", and "The free mPING mobile app" was built by NSSL and the University of Oklahoma. Your crews can send reports too.
  • Warnings are public. Weather service warnings for your counties can feed an alert to your phone or your software. The alerts service offers "an Application Programming Interface (API)" for that.

What can storm data tell you, and what can't it?

A hail map tells you where hail probably fell. It does not tell you which roofs were damaged. Keep these limits in mind:

  • Daily reports are a first look. The SPC says: "Our storm reports list is preliminary and likely does not contain all severe weather reports". A report that arrives "more than 10 days after the event" "won't show up here." It also filters reports to "limit artificially inflated initial estimates of severe weather events".
  • A reported size is often a guess. The NSSL says: "Hail size is often estimated by comparing it to a known object." It adds that "measurements using a ruler, calipers, or a tape measure are best." Many reports are a coin or a ball, not a ruler.
  • Radar hail size is an estimate. The name says so: Maximum Estimated Hail Size. On radar, hail "generally sends a return signal that looks like extremely heavy rainfall"; newer dual-polarization radar "can help tell the difference between hail, ice pellets and rain, and even determine hail size."
  • "Severe" is a weather word. The SPC defines severe hail as hail "at least 1 inch in diameter or larger". The NSSL puts it as "quarter size or larger is considered severe." That is a weather definition, not a roof-damage line.
  • The size line changed in 2010. The SPC data page says: "The NWS changed criteria for severe hail from 0.75 inch minimum to 1.00 inch minimum in 2010." So older and newer years in the history files are not counted the same way.
  • The history files have their own warnings. The SPC says the files "may not accurately reflect all storm events." and that "Monetary loss information is highly suspect and should be used with caution, if at all."
  • A warning is a reason to watch. NWS says "Warnings indicate imminent danger to life and property." A severe thunderstorm warning means hail of an inch or more, or strong winds, may hit within about the next hour. It is not proof hail fell on your customers' street.

Damage is confirmed on the roof, not on the map. IBHS, an insurer-funded research body, says: "Hail damage to your roof covering can shorten its life and may require repair or replacement." The signs it lists: "Random pattern of impact marks on shingles." and "Bruising – soft spots you can feel when pressing on the shingle." It adds: "Collateral damage confirms a hail event occurred, which helps distinguish hail damage from normal wear and tear." It also warns of a look-alike: "Granule loss along the edge of shingles (normal natural weathering)".

Neither IBHS page we read gives a hail size that damages roofs. Roof type, age and the hail itself all matter, so no hail size on a map tells you a roof is damaged.

The tool makers we read say the same about their own data. One roofing software company writes that which storms are worth pursuing "can't be determined simply from looking at a report." One hail tool's page says: "Storm data is directional and may be delayed; verify on-site."

So use the map to choose where to look and where to advertise, never as proof in an ad or in a talk with a homeowner.

How do roofers use storm data?

Three uses matter. Each one starts with the map and ends with your team.

1. Where to switch your ads on. Storm data tells you which towns to watch. On Google, you choose the places your ads show; see which location setting a roofing company should use. On Facebook you may not be able to aim at one street or one ZIP code; see whether roofers can target storm areas on Facebook. For the months to plan around, see how to find your storm months in our roofing marketing plan. Thinking about ads aimed at the streets a storm hit? Read whether geofencing ads are worth it for roofers first.

2. Crew and inspection planning. Use the reports and swaths to decide who goes where first and how many inspections you can run in a day. Then run your normal after-storm steps; our Texas hail guide covers the first 30 days after a hail storm. If you work in Texas, the same guide covers how much hail Texas gets, and our Texas roofing page covers the rest. We do not repeat Texas numbers here.

3. A follow-up list of people who already know you. Pull your past customers and open estimates inside the hit area. They know your name, so a short note from your team makes sense. Send texts only to people who agreed to get them (texts only with consent). Our guide to emailing past customers and our roofing estimate follow-up guide cover what to send.

Tree services: storm data helps you too; see our storm cleanup ads guide for tree services.

What may you do with storm addresses?

A map that shows street addresses makes it tempting to contact every home on it. Be careful.

  • Rules differ by state. Some states have rules on soliciting after a storm, on deductibles and on storm-repair contracts. For Texas, see the law section of our Texas hail guide; for other states, see our deductible rules by state. We do not repeat the rules here.
  • No cold texts or calls to a bought or built address list. Texts and calls to people who never asked to hear from you carry legal risk. See the texting rules for contractors (texts only with consent). The same goes for addresses from public permit records; see what you may do with building permit addresses.
  • The map is not proof. Never tell a homeowner, in an ad or in person, that their roof is damaged because of a map. Only an inspection shows that.

General information, not legal advice. Rules change. Ask a lawyer in your state.

How do you test a hail tool in 30 days?

Judge a hail tool by signed jobs from storm areas, not by how good the map looks.

Before you start

  1. Write down a baseline. From your last comparable storm or month, count storm-area leads, inspections, inspection hours and signed jobs.
  2. Set a lead source. Add "storm tool" as its own lead source in your CRM, so every lead and job that came from the tool is tagged.
  3. Write your keep-or-drop rule now. For instance: "We keep the tool only if signed jobs from storm areas went up by more than the tool and the extra hours cost us."

During the 30 days

  1. Use the tool only for the three uses above: ad areas, crew and inspection planning, and your follow-up list.
  2. Count the hours. Office time on the tool, plus inspection hours in the areas it pointed to.

After 30 days

  1. Compare signed jobs from storm areas, inspection hours and what the tool cost, against your baseline. Then work out your cost per signed job for the storm work, with the tool cost in it.
  2. No storm, no verdict. If no storm hits your area in the 30 days, extend the test to the first storm. Do not judge a hail tool on zero storms.
  3. Keep the tag. A job signed weeks later still counts for the tool.

The idea is the same as our test plan for instant roof quote tools: change one thing, tag it, and count signed jobs.

Worked numbers in this guide show the method; they are not real client results.

The table uses jobs and hours, not dollars. The numbers are our own inputs, chosen only to show the method. They are illustrative only, not real results.

One storm monthBaseline (no tool)Test (with the tool)
Storm-area leads2026
Inspections run1420
Inspection hours2130
Office hours on the tool—6
Signed jobs from storm areas45

What the table shows: one more signed job, for 9 more inspection hours, 6 office hours and the cost of the tool. Whether that is worth it depends on your margin per job and what the tool costs. Two storms are never the same size, so compare storms of a similar size where you can. Only your own numbers can answer it.

Is a hail map worth paying for?

It depends on how much of your work comes from storms, and on whether you can act fast.

Worth testing if:

  • Much of your work is storm and insurance work in areas that get hail.
  • You can inspect fast after a storm, with crews free to go.
  • You already tag lead sources, so you can tell what the tool brought.

A weaker fit if:

  • You mostly do repairs or retail replacements that do not follow storms.
  • You cannot staff a storm: no spare crews, no one to answer the phone.
  • You only need to know which towns to advertise in. The free SPC reports and the public weather service warnings may be enough for that.

Where Digital Hark fits

Digital Hark runs Google and Meta ads, landing pages, tracking and follow-up systems for home-service contractors. We do not sell or run hail tools, and we are not paid by any hail-data vendor. What we can help with: making sure your ads, landing page and tracking are ready for storm days, and showing signed jobs by source, so you can judge any tool on your own numbers. We never call, knock, text or book for you; your team does that. We confirm what is included in writing in your proposal.

Hail data checklist

  • ☐ You know where the free and public sources are: SPC daily reports and yearly hail files, weather service warnings, MRMS radar.
  • ☐ You treat every report and swath as "hail probably fell here", not "roofs are damaged here".
  • ☐ Your ads can be switched on for the right towns within hours of a storm.
  • ☐ You have a plan for who inspects where first.
  • ☐ Your past customers and open estimates can be pulled by area.
  • ☐ Texts go only to people who agreed to get them (texts only with consent).
  • ☐ You know your state's rules on storm sales and deductibles.
  • ☐ Any paid tool has its own lead source in your CRM, and a keep-or-drop rule written down.

Common questions

What is a hail map?

A map of where hail was reported or where radar suggests it fell. Some show points from storm reports, some show shaded radar swaths with an estimated size, and many paid tools show both. It shows where hail probably fell, not which roofs are damaged. Looking at building permit records as well? See what permit data can and cannot tell you.

Are there free hail maps?

Yes. The Storm Prediction Center posts each day's hail reports, which you can download as a spreadsheet or open in Google Earth, and keeps yearly hail files back to 1955. The weather service's MRMS radar products, including Maximum Estimated Hail Size, are public too.

How accurate are hail maps?

They are estimates. The SPC calls its daily reports preliminary and says they likely miss some storms. Radar hail size is an estimate by name, and many ground reports are sized by comparing hail to a coin or a ball. We do not quote any accuracy figure for any tool.

Does a hail report mean a roof is damaged?

No. A report is one point where someone saw hail. Only an inspection shows damage. IBHS lists the signs: a random pattern of impact marks and soft bruised spots on the shingles, and damage to things around the roof, which it says confirms a hail event occurred. Worn shingle edges can look like hail damage but are normal weathering.

What size hail damages a roof?

No hail size on a map tells you a roof is damaged. Roof type, age and the hail itself all matter. The weather service calls hail of 1 inch or more "severe", but that is a weather definition, not a roof-damage line. Selling roofs rated for impact? See what a Class 4 rating means.

How should a roofer use storm alerts?

As a reason to watch, plan and get ready: check the reports when the storm has passed, decide where crews go first, and switch on ads for the right towns. Do not treat an alert as proof that hail fell on a given street.

Kausar Ahmed, Founder, Digital Hark. Digital Hark runs ads, landing pages, tracking and follow-up systems for home-service contractors. We are not affiliated with any hail-data vendor, including HailTrace, HailPoint, Hail Drive and QXO, and we do not sell or run hail tools. General information, not legal advice. About Digital Hark

Find out where your leads are being lost

Book a free Growth Diagnosis. We review your ads, website and follow-up, and send you a short written summary of the top leaks and what to fix first.

Check my storm-day ads and tracking

We reply within 24 hours

Free Growth Diagnosis