Guide · Remodeling

Cabinet and countertop marketing for remodelers: refacing, replacement and countertop jobs

How to market cabinet refacing, cabinet replacement and countertops as their own jobs: separate ad groups and pages, cross-negatives with your full-remodel ads, a plain reface-or-replace page, showroom and sample visits as the offer, careful material wording, and cost per signed job for each.

  • By Kausar Ahmed, Founder, Digital Hark
  • Updated
  • 12 min read
Two installers fitting a new quartz countertop on lower kitchen cabinets

The short answer

Cabinet refacing keeps the boxes and the layout and puts on new doors and drawer fronts. Replacement means new boxes, and the layout can change. Countertop searches name the material, such as quartz or granite. These homeowners are not shopping for a full kitchen remodel, so answer "reface or replace?" plainly and count signed jobs per job type.

Key takeaways

  • Refacing, replacement and countertops are different jobs with different searches. Give each its own ad group, page and photos.
  • Keep them apart from your full kitchen remodel ads with cross-negatives, so each search lands on the right page.
  • Homeowners ask "reface or replace?" first. Answer it on a page in plain words, without prices or savings claims.
  • Say about materials only what the maker or a trade group says, and name the source.
  • Make refacing, replacement and countertops three project types in your CRM, and count signed jobs for each.

Why market refacing, replacement and countertops apart from kitchen remodels?

Treat them as their own services, not as a line on your kitchen page. A homeowner who wants new cabinet doors on sound boxes, or a new quartz top on the cabinets they have, is not shopping for a full remodel. They search for that one job, want to see ones like it, and want to know what happens next.

In practice:

  • Three jobs, three ad groups and three pages: cabinet refacing, cabinet replacement and countertops (the stones and surfaces you really install).
  • Cross-negatives between those ads and your full kitchen remodel ads.
  • A reface-or-replace page that answers the homeowner's first question.
  • An offer that fits the job: a showroom visit, or an in-home sample and measure visit.
  • Your own install photos, and material wording taken only from the maker or a trade group.
  • Signed jobs per job type as the measure.

This guide is for remodelers and cabinet and countertop companies that sell to homeowners. Marketing by cabinet manufacturers to dealers and builders is a different job and is not covered here. Full kitchen remodels have their own playbook on our kitchen remodeling page. Cabinet painting is a painting job; see our marketing for painting contractors. For the other projects we set up this way, see all the project types we market for remodelers.

What do refacing and quartz searches tell you that kitchen remodel searches do not?

They use different words, and they come from a homeowner with a narrower job in mind.

  • The words. Cabinet searches use words like refacing, cabinet replacement, new cabinets and cabinet installation. Countertop searches name the material or the job: quartz, granite, countertop installation, countertop replacement. A full remodel search says "kitchen remodel" or "kitchen renovation".
  • The job. A refacing or countertop job is usually smaller and faster than a full remodel, with fewer trades. Ads and pages that talk about layout, permits and a long design process miss what this homeowner wants to hear.
  • The first question. For cabinets it is often "reface or replace?". Many homeowners research that question before they call a company (more in the reface-or-replace section below). For countertops it is often which material, and what happens at the template and install visits.

If all of this goes into one "kitchen" ad group, a refacing search may land on a full-remodel page, and you cannot see which job type brings signed work.

How do you keep a "cabinet refacing" search out of your kitchen remodel campaign?

Cross-negatives. Each campaign blocks the words that belong to another one of your campaigns, so a search shows the ad and page made for it.

One example: if refacing has its own campaign, add "refacing" as a negative in your kitchen remodel campaign. A "cabinet refacing" search then shows your refacing ad and page, not your full-remodel ad.

Then block only what you really do not do. Store and product searches and "cabinet painting" are common remodeler negatives, but if you paint cabinets or sell to the shopper who searched, keep them. The method, the store list and the match types are in our negative keyword guide for roofers and remodelers, in the section "Cross-negatives: how do you keep your own campaigns apart?".

How should a page explain refacing vs replacement without prices?

It should answer the question plainly, in your own words, for the work you do. No prices, no cost ranges and no "saves X%". Those numbers change by kitchen, and a homeowner who reads one and then gets your quote may feel misled.

What to explain:

  • What refacing is: the cabinet boxes stay; the doors, drawer fronts and the visible faces are new. The layout stays the same.
  • What replacement is: new cabinet boxes. The layout can change, and new countertops often come with it.
  • When refacing fits: the boxes are sound and the homeowner likes the layout. Say who checks the boxes and when (for example, at the measure visit).
  • When replacement fits: the boxes are damaged or worn, or the homeowner wants a different layout, more storage or a new island.
  • What happens next: one clear step, such as "book an in-home sample and measure visit" or "visit our showroom", with a short form or a call button.
  • Photos of both job types from your own installs, labeled refacing or replacement.

Leave out claims about home value or resale. If a replacement job uses allowances for cabinets, explain them in the proposal, not on this page. We build pages like this as landing pages for each service.

Should the offer be a showroom visit or door and stone samples at home?

For cabinet and countertop jobs, the best next step is usually seeing and touching the real thing. Make that the offer:

  • A showroom visit: door styles, finishes and stone or surface samples in one place. Put the showroom address, hours and parking on the page, and say if the visit is by appointment.
  • An in-home sample and measure visit: "we bring door and stone samples to you." This suits refacing and countertop jobs, where the homeowner wants to see the samples next to their own floor, walls and light.
  • A short form that fits the visit: job type (refacing, replacement, countertops), rough size of the kitchen, the materials they like, when they hope to start, and how they want to be contacted (texts only with consent).

Your team runs the visit and the follow-up. On your Google Business Profile, list each job type as its own service and check the rules on using a cabinet brand's name; both are in our Google Business Profile guide for remodelers. Planning an open house or design night? Our showroom events guide covers those.

Which maker and trade group lines can you quote for stone, quartz and cabinets?

Only what the maker or a trade group says, with the source named. Name the materials and cabinet lines you install in plain words, but do not write your own claims about how long they last, how they handle heat or stains, or how much care they need.

What the sources say:

  • Natural stone. The Natural Stone Institute's care page says: "When consulting with your stone supplier, you may find that many stones do not require sealing." It also says: "While many stones can withstand heat, the use of trivets or mats is recommended." So sealing and heat advice comes from the stone supplier, not from your ad.
  • Quartz. Even a quartz maker tells owners to protect the surface from heat. Caesarstone's care page, under "Heat Caution": "Always place hot cookware on trivet and hot pads".
  • Cabinets. The Kitchen Cabinet Manufacturers Association (KCMA) runs a certification program and says: "Only KCMA-certified cabinets have passed 14 rigorous tests". If the maker's own page says the cabinet line you install is KCMA certified, you can say so and show the seal. If it does not, leave it out.

How to use it:

  • Leave out absolute words such as "heat-proof", "stain-proof" or "maintenance-free", and any durability or warranty-year figure of your own. If a maker gives a warranty, link the maker's page instead of restating it.
  • Quote, name and date any maker line you use on a page, and check it again before the page goes live.
  • Do not rank brands. Name the ones you install.

What should refacing and countertop install photos show?

Your own installs, shown the way the homeowner will judge them:

  • Before and after from the same spot. The same kitchen, the same angle, old doors and new doors. For refacing, this is the whole story.
  • Close-ups: door styles, edges, the seam on a stone top, the sink cut-out, hardware.
  • The steps: the template visit, the old top coming off, the new top going in, the doors being hung.
  • A short note per project: refacing or replacement, the material, the town.
  • Homeowner permission for every photo, and no house numbers or family photos in the shot. Our customer endorsements guide covers photo consent.

If you show design renderings, label them as renderings, not finished jobs; our 3D renderings guide covers how.

Do Local Services Ads work for countertop companies?

They can be an option for countertops. Google says: "At this time, Local Services Ads are available only for certain service categories." Its list includes "Countertop services", along with "Kitchen remodeling", "Bathroom remodeling" and "Carpenters". We did not see a cabinet category on that list, so check it for your own business before you plan cabinet jobs around Local Services Ads.

Should you buy shared cabinet or countertop leads?

Think before you do. Lead sellers offer cabinet refacing and countertop leads, and the same request can go to more than one company, so the first talk is often about price. If you use them, judge each source the same way as your own ads: how many of its requests turned into visits, proposals and signed jobs.

How do you see which job signs best: refacing, replacement or countertops?

Make refacing, replacement and countertops three project types in your CRM, and give every lead a source field. Then track, per job type:

  • Inquiries by source (Google Ads, Local Services Ads, your pages, referrals, shared sites);
  • Visits held (showroom, sample and measure, template);
  • Proposals sent;
  • Signed jobs;
  • Cost per signed job: what you spent on a source ÷ the jobs of that type you signed from it.

Worked numbers in this guide show the method; they are not real client results. For example: over a quarter, the countertop ad group brings 60 inquiries, 25 visits, 15 proposals and 9 signed jobs. The refacing ad group brings 40 inquiries, 18 visits, 10 proposals and 5 signed jobs. The replacement ad group brings 25 inquiries, 12 visits, 7 proposals and 2 signed jobs. If all three were one "kitchen" line, you would see 125 inquiries and 16 signed jobs, and never notice that replacement signs the fewest per inquiry. Divide each group's spend by its signed jobs to see what each job type really costs.

Our guide to cost per signed job shows how to set it up by lead source. Sending signed jobs back to Google Ads as offline conversions, so the account learns which searches turn into contracts, is part of our call and lead tracking.

Where Digital Hark fits

Digital Hark builds the growth system for remodelers: Google and Meta ads in your own accounts, landing pages, tracking of calls, forms and signed jobs, and a fast first reply and follow-up list (texts only with consent). For cabinet and countertop work, that means separate ad groups, pages and numbers for refacing, replacement and countertops. Your team calls the homeowners, runs the visits and sells the jobs; we never call your leads or sell for you. You own every ad account, page and lead.

Common questions

How do cabinet and countertop companies get more leads?

Sell them apart from your full kitchen remodels: refacing, replacement and countertops each get their own ads and page, with "refacing" blocked in your kitchen remodel campaign. Answer "reface or replace?" in plain words, offer a showroom visit or door and stone samples at home, show your own installs, and track visits, proposals and signed jobs by job type.

Should a "cabinet refacing" search show your kitchen remodel ad?

No. Give refacing its own campaign and add "refacing" as a negative in your kitchen remodel campaign, so a "cabinet refacing" search shows your refacing ad and page. Write the refacing ad about new doors and fronts on the cabinets the homeowner keeps. Ads that talk about layout, permits and a long design process miss what this homeowner wants to hear.

Is there a Local Services Ads category for cabinet companies?

We did not see one. Google says Local Services Ads "are available only for certain service categories", and its list includes "Countertop services", along with "Kitchen remodeling", "Bathroom remodeling" and "Carpenters". Check Google's current list for your own business before you plan cabinet jobs around Local Services Ads.

When does cabinet refacing fit, and when does replacement fit?

Refacing fits when the cabinet boxes are sound and the homeowner likes the layout; say on your page who checks the boxes and when, for example at the measure visit. Replacement fits when the boxes are damaged or worn, or the homeowner wants a different layout, more storage or a new island. Leave out prices, savings percents and home-value claims.

What can you say about quartz, granite and cabinet quality in ads?

Only what the maker or a trade group says, quoted and named. The Natural Stone Institute and a quartz maker both recommend trivets, so absolute heat wording does not belong in your ads. Mention KCMA certification only if the maker says the cabinet line you install is certified.

Should you buy cabinet refacing or countertop leads?

Treat them like any shared lead source: the same request may go to several companies. Count how many turn into visits, proposals and signed jobs, and compare that with your own ads before you rely on them.

Kausar Ahmed, Founder, Digital Hark. Digital Hark runs ads, landing pages, tracking and follow-up systems for home-service contractors. We are not cabinet makers, stone fabricators or installers, and we do not recommend any brand. About Digital Hark

Find out where your leads are being lost

Book a free Growth Diagnosis. We review your ads, website and follow-up, and send you a short written summary of the top leaks and what to fix first.

Check my cost per signed job

We reply within 24 hours

Free Growth Diagnosis