Guide · Ads
Microsoft (Bing) Ads for contractors: are they worth it for roofers, remodelers and tree services?
Where Microsoft ads show, why nobody can honestly tell you they are cheaper, how to copy your Google campaigns across, which settings to fix after the import, and how to test it against signed jobs.
The short answer
Often yes, as a second channel once Google Ads already brings you signed jobs. Microsoft Ads can show your ads on Bing and partner sites, and you can import your Google campaigns, so a test does not start from zero. Judge it by cost per signed job from your own tracking, not by claims that clicks are cheaper.
Key takeaways
- There is no Microsoft-only cost benchmark for home services that we could verify. The "cheaper than Google" numbers online come from agency and vendor blogs.
- You can import your Google Ads campaigns. Check the import options: by default Microsoft raises bids and budgets that are below its minimums, and new campaigns go live unless you choose to pause them for review.
- After the import, check the location option, your negative keywords and your tracking. Microsoft's defaults are not the same as a careful local set-up.
- Microsoft's tracking runs on its own UET tag. Add it to every page and send signed jobs back as offline conversions.
- Test one proven campaign for a fixed period and compare cost per signed job with Google. Keep it, change it or stop.
Want us to find your three biggest lead leaks?
Free Growth DiagnosisAre Microsoft (Bing) Ads worth it for contractors?
For many contractors, yes, as an add-on, not a replacement. Google is where most contractors start, and it should work well first: good landing pages, fast replies and tracking to signed jobs. Once that is true, Microsoft Ads is a fair next test because you can reuse the work you already did on Google.
It is worth testing when:
- Your Google campaigns already bring signed jobs and you know your cost per signed job. Then you have something to compare against.
- You want more of the same searches. People who search on Bing, or on a computer where Bing is the default search engine, will not see your Google ads.
- You can track it. Without its own tracking, a Microsoft test only shows clicks, and clicks do not pay the crew.
It is not worth it yet when your Google Ads are not profitable, you cannot answer new leads fast, or you have no way to tell which jobs came from which ads. Fix those first; our Google Ads guide for contractors covers the basics that both platforms share.
What are Microsoft Ads, and where do they show?
Microsoft Ads (Microsoft Advertising) is Microsoft's ad platform. Search ads work the way you know from Google: you pick keywords, write ads, set a budget and pay when someone clicks.
In Microsoft's own words: "Microsoft Search ads can appear on Microsoft Bing and search partner sites such as Yahoo, AOL, DuckDuckGo, Ecosia, and other partners. Depending on your campaign settings, ads may also appear across relevant Microsoft Advertising Network placements."
How big is it? On the same page, Microsoft gives "6.4 Billion monthly PC searches (USA)", "109 Million unique PC users (USA)" and "38.1% PC market share". That is Microsoft's own figure, from Comscore data for March 2023, US desktop only. It does not tell you how many searches happen on phones, or what share of all searches Bing has.

Your Bing Places listing is a separate job: see Apple Maps and Bing Places for contractors.
Are Microsoft Ads cheaper than Google Ads for contractors?
We could not verify that they are. There is no Microsoft-only home services benchmark we could verify. LocaliQ's 2026 search benchmarks for home and home improvement mix Google and Microsoft campaigns in one average, and LocaliQ gives no Microsoft-only figure for them.
Many guides say Microsoft clicks or leads cost less. When we checked, those figures came from agency and vendor blogs, often with no source, and some of them did not agree with each other. So we do not repeat them.
What this means for you:
- Plan from the Google numbers you already have. Our Google Ads guide explains what Google Ads cost for contractors in 2026, with the LocaliQ averages and what they include.
- Run your own test and measure the one number that matters: cost per signed job. A cheaper click that never turns into a signed job is not cheaper.
How do you copy your Google Ads campaigns into Microsoft Ads?
Use Microsoft's Google import. Microsoft says campaigns move "in just a few clicks", and that Performance Max, Audience ads and Shopping can be imported too. Its developer docs say Microsoft "will import most supported campaigns, ads, targets, ad extensions, and other settings by default", and add: "Keep in mind that not all information will be imported".
The import options matter more than the button. Microsoft's developer docs describe them this way (the names in your account may read a little differently):
- Bids raised to the minimum: on by default. Any bid below Microsoft's minimum is raised automatically during import.
- Budgets raised to the minimum: on by default. Any budget below Microsoft's minimum is raised during import too.
- Pause new campaigns: off by default. Turned on, it "will pause newly imported campaigns allowing you to review your campaigns before you get your campaigns up and running". Turn it on, so nothing spends before you check it.
- Bid and budget changes. You can set bids and budgets higher or lower than in Google with a percentage change.
- Conversion goals. The import can bring over conversion goals you have not imported before. You still need Microsoft's own tag on your site (see tracking below).
- Scheduled imports. You can import now, once, or on a schedule (daily, weekly, monthly or auto).
If you schedule imports, check after each one that your Microsoft fixes (location option, negatives, budgets) are still the way you set them. Changes you make in Google can come across again.
Which settings should you check after the import?
Three things: location, negative keywords and budgets. The shared basics (one service per ad group, a landing page per service, ad schedule, search terms) are the same as on Google; see which settings waste a contractor's money in our Google Ads guide. Here is only what Microsoft does its own way.
Location. Microsoft can show your ads to people "in, searching for, or viewing pages about your targeted location", or "only … to people in your targeted location". Its docs say that if you set nothing, you get the wider option. If you only work in your service area, choose the "people in" option. You can also target a radius around "a zip code, coordinates, landmark, or area", and exclude areas you do not serve. One more catch: if an ad group has its own locations, it does not use the campaign's locations. Check both levels after the import.
Negative keywords. Microsoft's rules:
- Negatives can be exact match or phrase match. "Phrase match is the default match type."
- Plurals are not blocked for you. Microsoft says: "To prevent plural form of a keyword from matching, add the plural form to the campaign or ad group's negative keyword list." So add "jobs" as well as "job", "careers" as well as "career".
- Shared lists: "You can create up to 20 negative keyword lists per account" and add "up to 5,000 negative keywords to each negative keyword list".
- "Each campaign can be associated with one negative keyword list", and lists "cannot be associated with an ad group". For an ad-group negative, add it to the ad group itself.
For what to block (jobs, DIY, cheap, free, far-away towns), use our guide to negative keywords for roofers and remodelers. The words to block are the same on both platforms. The match-type advice in that guide is Google's; on Microsoft, negatives are exact or phrase only.
Budgets and bids. If the import raised any bid or budget to Microsoft's minimum, look at the new numbers and decide if they fit your test.
Google vs Microsoft: what stays, what changes
| Part of the set-up | Same as on Google | Microsoft's own way |
|---|---|---|
| Campaigns | Import one proven campaign | Not all information will be imported |
| Bids and budgets | Your Google bids and budgets | Raised to Microsoft's minimum by default |
| Location | Keep the same service area | Choose the people in option, at campaign and ad group level |
| Negative keywords | The same words to block | Exact or phrase match only, and add the plural form |
| Tracking | Track every call and form to a signed job | Its own UET tag on every page |
How do you track Microsoft Ads to signed jobs?
Microsoft's tracking runs on its own UET tag. Your Google tag does not do this job. Microsoft says UET "records what customers do on your website" and that "UET is a prerequisite for conversion tracking and remarketing in paid search."
The steps, in plain words:
- Add the UET tag to every page. Microsoft: "Add the UET tag tracking code to every page of your website."
- Set conversion goals for the actions that matter: a form sent, a call from the site, a booked estimate. "Conversion goals allow you to specify which actions (recorded by UET) to count as conversions."
- Send signed jobs back as offline conversions. Microsoft says you can "import offline conversions, to better measure what happens after your ad was clicked." Each click gets a Microsoft click ID (MSCLKID). Save it with the lead in your CRM, then upload it when the job signs. Hashed email or phone can be sent instead.
- Mind the timing. After you create an offline conversion goal, wait two hours before you send any offline conversions. Data can take up to six hours to show. The conversion time must be within the last 90 days.
Offline conversion timing
Why it matters for bidding: Microsoft's Maximize Conversions and Target CPA need "conversion tracking (a UET tag and a conversion goal) set up (offline conversions are supported too)". And "If your campaign falls below 30 conversions over any 30-day period, Maximize Conversions will stop optimizing your bids." A small local test may not reach that, so check what your bid strategy is doing.
The rest is the same as on Google: track every call and form to a signed job. Our Google Ads guide shows how contractors track Google Ads to signed jobs; see also our tracking service and the cost per signed job guide for the method.
Which trades does Microsoft Ads fit?
The logic is the same for every trade: start with the campaign that already signs jobs on Google, and keep the same service area. We do not use audience stats here, because the ones online are not from a source we could verify.
Roofers
Start with your roof repair and storm damage searches in your core service area. Those are urgent searches, and every search engine gets them. Keep the location tight (the "people in" option) so a storm in another state does not spend your test. Our guide to Google Ads for roofers covers the keywords and campaign set-up; import that campaign rather than building a new one.

Remodelers
Kitchens, baths and additions take a long time to decide. Keep kitchen and bath in separate campaigns, as you would on Google, so you can see which one signs. Log the lead date and the signed date, because a remodel that signs months later should still count for the Microsoft test. Our guide to Google Ads for remodelers covers the structure.
Tree services
Emergency tree removal and storm cleanup are urgent searches; planned trimming and removals are slower. Test the emergency and removal campaign first, in the towns you can reach fast. Our guide to Google Ads for tree service covers the keywords and set-up on the Google side.
How do you run a fair 60-day test?
This plan is our suggestion. It is illustrative only, not real results, and 60 days is our choice, not a Microsoft rule.
- Import one proven Search campaign from Google, with "pause new campaigns" turned on.
- Fix the settings before it goes live: location ("people in" your service area), negatives (including plurals), and any bid or budget Microsoft raised.
- Add tracking: UET on every page, conversion goals, and offline uploads for signed jobs.
- Set a fixed test budget you choose and can afford for the whole test. Do not change it every week.
- Answer every lead fast. The same reply plan you use for Google leads; see speed to lead.
- Compare cost per signed job for the same period. The letters below show the method; they are not real client results. Say Google's cost per signed job in the test period is G and Microsoft's is M.
- Keep Microsoft if M is close to G or lower, and the jobs are the kind you want.
- Change one thing (keywords, location, landing page) if leads come but do not sign.
- Stop if M is far above G after a fair test with fast replies and working tracking.
Remodelers: also count jobs that sign after the 60 days from leads that came in during the test.

What changed in Microsoft Ads in 2026?
- Max CPC on new campaigns. Search Engine Roundtable reported in August 2026 that from October 1, 2026, Max CPC can no longer be chosen when you create a new campaign that is not part of a portfolio bid strategy. Existing campaigns that use Max CPC keep it, and portfolio strategies keep it. If you import a campaign after that date, check which bid strategy it gets.
- AI Max, a closed pilot. At its Activate 2026 event, Microsoft listed "AI Max (Closed Pilot) A new AI layer for search campaigns", with "Expanded query matching". As of June 2026 it is a test for selected advertisers, not open to everyone.
Where Digital Hark fits
We are not affiliated with Microsoft, and Microsoft Ads are not one of our listed services. We run Google and Meta ads in your own accounts, landing pages, tracking and follow-up systems for roofers, remodelers and other home-service contractors. We never call your leads or sell jobs for you; your team does that.
A Microsoft test only works on top of a Google set-up that already tracks to signed jobs. That is the part we can check for you.
Common questions
Is Bing Ads the same as Microsoft Ads?+
Yes. Bing Ads is the older name that many people still use. The platform is now called Microsoft Advertising, and its search ads can show on Bing and on partner sites.
Can I import my Google Ads campaigns into Microsoft Ads?+
Yes. Microsoft imports most campaigns, ads and settings by default, but not everything. Check the import options: bids and budgets below Microsoft's minimums are raised by default, and you can choose to pause new campaigns so you can review them first.
Do I need a separate tracking tag for Microsoft Ads?+
Yes. Microsoft's tracking runs on its own UET tag, which Microsoft says to add to every page of your website. To count signed jobs, save the Microsoft click ID with each lead and upload it as an offline conversion.
Do Microsoft ads show on Yahoo and DuckDuckGo?+
They can. Microsoft says its search ads can appear on Bing and on partner sites such as Yahoo, AOL, DuckDuckGo and Ecosia, depending on your campaign settings.
Should I run Microsoft Ads instead of Google Ads?+
No. Use Microsoft Ads as an add-on once your Google Ads bring signed jobs and you track them. Then test Microsoft with one proven campaign and compare cost per signed job. To see which rivals meet you in the same auctions, see what Auction insights shows.
How long should a Microsoft Ads test run?+
We suggest about 60 days with a fixed budget you choose, so you have enough leads to judge. That is our suggestion, not a Microsoft rule. Remodelers should also count jobs that sign later from test leads.


